Sanitary Food Processing projects present many unique challenges to electrical and mechanical contractors trying to mount conduits or pipe. Sanitary applications require stainless steel to handle constant washing and cleaning of the supports. The support channels cannot have the in turned lips that are found on typical Unistrut channels. Threaded rods must have internal threads…
- Skip to primary navigation
- Skip to main content
- Skip to primary sidebar
- Skip to secondary sidebar
- Skip to footer
Strut News
Category: General Unistrut Information
Unistrut WT Wide Slotted Strut Channel
Unistrut has developed a new slotted channel perforation for use with 5/8” threaded rod. The Unistrut “WT” Perforation offers an 11/16″ x 2″ Slotted perforation at 3″ on center for any of our 1-5/8″ Wide Unistrut profiles. This new slot pattern is great for data centers, heavy-duty supports and other applications that require 5/8″ threaded…
Unistrut P2580 Heavy Duty Cantilever Bracket
Unistrut is proud to introduce the highest capacity cantilever Unistrut bracket, The P2580 series. The Unistrut P2580 is designed to hold heavier loads, increase the span between supports, and allow attachment on top and bottom. This results in significant material and labor cost savings. Unistrut Midwest has the full line of P2580 brackets in stock…
P2788 Unistrut Hinged Beam Clamps
Unistrut invented the Unistrut slotted channel framing system and continues to be on the forefront of innovation in the slotted channel framing markets. One of the newest products in the Unistrut product offering is the P2788 Hinged Beam Clamp. The P2788 is a solution for mounting Unistrut channel level when the building steel is sloped….
Unistrut Finish Options
Unistrut Metal Framing is available in many finishes to meet various applications. Unistrut Midwest has experts available to help you determine the best finish for your project, but if you prefer to do your own research, we will cover the features and benefits of each finish to help you make the right selection. Pre-Galvanized…
Unistrut Rooftop Duct Supports
Unistrut Channel has been used by Electrical and Mechanical contractors to support conduit and duct for as long as slotted channel framing has existed. A relatively new location that Unistrut is being used to support duct work is on the roof. Rooftop applications are becoming more common as more equipment is moved from the ground…
Custom Packaging Options Available
Unistrut Channel and fittings are not the easiest products to handle when shipping via an LTL Carrier. The Unistrut channel is typically 10′ or 20′ in length. Each bundle can weigh up to 2,000 lbs. This creates some unique obstacles when preparing shipments for trans-atlantic customers. With over 50 years of shipping experience, Unistrut Midwest…
Curved Unistrut Channel is Possible
Unistrut Midwest offer many fabrication services including our ability to provide custom curved Unistrut channel. Unistrut’s curved channel is commonly used for trolley systems, paint booths, tunnel conduit supports, and many other applications. Contact us today to discuss your project to see if curved Unistrut is the right solution. Unistrut Curved Channel Quote Form In…